The ground is through the mount, but I ran a secondary ground wire from the mounting bolt directly to the negative battery terminal to make sure....
After checking every wire in the plugs to the ignition switch, the red w/ tracer was always on in the start position, the blue was activated only...
i have replaced the ignition switch with a brand new shiny one, first 2 key turns, it all worked and turned back off when the key was turned back....
I think you are right here, I am printing out some new wiring diagrams and going to try jumping through the igition switch input wires to bypass...
I would love a copy via email? I'll PM you. Thank YOu!
thanks Tim
i am using the chilton's diagram from the book for the 78
I have a lt blue to the i terminal and a red_white to the s terminal. jumping works with the terminal wires off, so I am assuming there is a...
mounted the fender and the solenoid to the fender.... at first, turned very slowly jumped. key did nothing. then, I jumped it from my running...
jumper directly to starter produced fireworks, but did verify starter is good. connections to the battery are good, solenoid was literally just...
solenoid needs to be grounded? .... thats probably my problem as the fenders are off and it is not mounted to anything...
I have replaced the starter and starter solenoid on a barn find 78 cj5 with a 4.2 I6. brand new battery, I get 12 v on the I terminal on the...
frame
tub front
Separate names with a comma.
