Exactly how I ran my HEI.
Picked one up from NAPA this afternoon and will install this weekend. Thanks for the replies!
Hey all, I need to replace my starter motor on my 75's 304 because it started not wanting to fully disengage after cranking and sounds like...
Keep us posted. I'm willing to bet you won't have anymore vibrations.
The painless 10150 harness has everything you need and it supplies a separate ground to everything so it reduces the ground problems.
Interesting. Someone must have corrected the use of aluminum after I ordered mine. Were they 3 degrees?
There are several options but delivered it was $479. X spline, greaseable joints and the 10 spline yoke for the T-case. Just make sure to follow...
I will add this, the shims that came with the Rough Country lift are aluminum and should be replaced with steel shims like the ones from WFO....
Ha Ha!
No, all factory except the springs of course and new shackles to replace what ever the previous owner put on for a lift.
I went with a double cardan shaft and transfer case yoke from Tom Woods. [ATTACH]
Not recently. When I put the DUI distributor in a year and a half ago I set it for 10 degrees. Ibdid checkbit a few months ago. I will have more...
No, luckily
Thanks for all the tips! I have readjusted the idle mixture back to what is should be and it does still rumble and pop on deceleration. Now I will...
Separate names with a comma.