These don't look too bad if you need them. No bevel though. I might buy them if you don't to have spares for my jeep....
I went for years with 90:1. Pretty good Rubicon gear with 33's. Your 83 with 35's would be the minimum in my book, but it would be fine after you...
Oh ok. If I can dream, it's a 115" CJ8 with 5.13's, 6.0, 4L60E, Atlas.
Following with interest. A few observations: If we are talking about fitting any of this in a ECJ, there are some length and width issues with a...
Now that military month is over, (it was fantastic btw), I get a short window of painting weather this week, so I want to repaint the outer frame....
That could almost make a guy want to light one up...
I can measure a stock V6 one if needed. And I thought they both had a bend in them...
Yes, I would disconnect the pitman, center the steering box (counting turns), then center the tires to straight forward. Then hopefully the...
Not sure I get your question, but yes a filter up before carb works best for me. I always want to push through a filter. And if the return goes...
On a new tank, I would solder or braze a fitting in the top. On a used tank, I have tapped a 1/8" NPT elbow into the sending unit top. On my 3B...
Sorry man. Didn't mean to minimize good old fashioned math. In my defense, I recently did some long division on a cardboard box with a sharpie to...
Separate names with a comma.