-
Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.Dismiss Notice
Keys5a's Recent Activity
-
Keys5a replied to the thread 44 Floater.
Thanks! -Donny
May 23, 2024 at 10:00 PM -
Keys5a replied to the thread Four Cylinder Repacement Fuel Pump Issues.
This video is a classic example of way you don’t toss those old worn out parts in the trash bin. They are made better than the new crap...
May 23, 2024 at 12:20 AM -
Keys5a replied to the thread Transmission And Transfer Case Oil.
Though motor oil might meet a protection spec, you want to run a 90 weight GL4 gear oil in your CJ. I have a car that run sae 30 motor...
May 22, 2024 at 11:00 PM -
Keys5a replied to the thread Lost Oil Pressure.
Wise move on pulling the timing cover to throughly check the oil pump and the rest o& everything else. Yes, it looks like you loosened...
May 22, 2024 at 10:49 PM -
Keys5a replied to the thread 44 Floater.
Can I ask for a measurement on the length of the axle shafts? Assuming they are 19 spline inner/27 spline outer? I collecting parts to...
May 22, 2024 at 10:24 PM -
Keys5a liked ITLKSEZ's post in the thread High Performace F Head.
I’ve copiloted in a racer that would pull hard up past 7k. The sound is like nothing else. it was this one…...
May 22, 2024 at 9:55 PM -
Keys5a replied to the thread Engine Tooling.
I have a similar (older) Sunnen guide hone, and it works well. I also have a setup that sleeves the original worn guide. I ream the worn...
May 22, 2024 at 9:51 PM -
Keys5a replied to the thread My Old Millermatic 35 Feed Motor Has Died....
I would still look for a NOS or used feed motor. The old machines weld so much better than the newer machines, in my opinion. I think is...
May 22, 2024 at 9:21 PM -
Keys5a replied to the thread Engine Tooling.
I also have a number of engine machine shop tools/machines, many Kwik-Way branded. I have a couple of those electric valve seat...
May 22, 2024 at 9:03 PM