1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

wheelie's Recent Activity

  1. wheelie liked PeteL's post in the thread Transmission And Transfer Case Oil.

    I'm trying not to. :rofl:

    May 27, 2024 at 8:25 AM
  2. wheelie replied to the thread Ebrake Separation.

    Where the cable attaches to the lever on the transfer case? If you got the pin that attaches the clevis to the lever then, yes, it...

    May 27, 2024 at 8:24 AM
  3. wheelie liked nickmil's post in the thread WTB Spicer 18h Spring.

    Local Ace Hardware should have what you need. Just a basic hardware spring.

    May 26, 2024 at 6:52 PM
  4. wheelie replied to the thread Logan 922 Lathe.

    Owner couldn't get the lathe to work but has since got it running, purchased additional tooling to sweeten the deal. Doesn't make sense...

    May 26, 2024 at 6:48 PM
  5. wheelie liked nickmil's post in the thread Logan 922 Lathe.

    I have a Pow R Kraft lathe that I love. It’s loosey gooosey, but with care gets most things done. I’m currently using it to make Dana...

    May 26, 2024 at 6:41 PM
  6. wheelie liked Fireball's post in the thread Making/improvising Special Tools.

    Yes, I was just genuinely curious. I think I want to make a similar thing.

    May 26, 2024 at 6:40 PM
  7. wheelie liked PeteL's post in the thread Making/improvising Special Tools.

    Cool. By coincidence I also have a 3 inch extension that I made for my bottle jack. :D [ATTACH]

    DSC01503.JPG May 26, 2024 at 6:40 PM
  8. wheelie liked nickmil's post in the thread Transmission And Transfer Case Oil.

    I warned my customers when they purchased an old style (T-18,T-14,NP-435,SM-420, T-90, etc.) that if they used synthetic or GL-5 in the...

    May 26, 2024 at 6:39 PM
  9. wheelie liked nickmil's post in the thread Transmission And Transfer Case Oil.

    Don’t use synthetic. May cause hard shifting issues. Too slick for the blocking rings.

    May 26, 2024 at 6:39 PM
  10. wheelie replied to the thread Dark Brown Oil Stain From Front Wheel.

    Could be the inner wheel hub seal. That fluid (gear oil) should be much thicker in consistency than brake fluid. Brake can get brown and...

    May 25, 2024 at 5:59 PM
  11. wheelie replied to the thread Fino's 58 Wagon.

    Or grab a 5.3 or 6.0 outta the yard. Probably a lot of work to make it work but they run forever. Friend has a 5.3 with just under 400k...

    May 25, 2024 at 8:50 AM
  12. wheelie liked Fireball's post in the thread Fino's 58 Wagon.

    I would start at the bottom since that seems to be where the problem is. Pull the #1 cap and inspect the bearing. If it's bad, then...

    May 23, 2024 at 12:36 AM
New Posts