1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Buick 350 PS bracket

Discussion in 'Early CJ5 and CJ6 Tech' started by MarkK, Nov 25, 2012.

  1. MarkK

    MarkK Rita the Jeep

    I ran into this gem of a truck that the owner will sell parts off of. Is this the right power steering mount to fit on the 225? And are there any other desirable parts?
    [​IMG]
     
    MarkK, Nov 25, 2012
    #1
  2. nickmil

    nickmil In mothballs.

    That's the high mount unit that is hard to find. I'd get that with hoses, steering gear box, make sure you get the crank and water pump pulley so you have the right ones for the pump. If it were me I'd get the alternator brackets as well.


    Sent from my iPhone
     
    nickmil, Nov 25, 2012
    #2
  3. oddfirejeeper

    oddfirejeeper Active Member

    that is the same setup i grabbed for my power steering conversion. i bolted it all up and everything lined up nice.
     
    oddfirejeeper, Nov 26, 2012
    #3
  4. Harlan

    Harlan Member

    What is the donner Truck?
     
    Harlan, Nov 27, 2012
    #4
  5. MarkK

    MarkK Rita the Jeep

    I think it's this one.
    [​IMG]
    But have been super busy and haven't had time to get back to it.
     
    MarkK, Nov 27, 2012
    #5
  6. Vanguard

    Vanguard Take Off! Staff Member

    That's what I used as well. Nick told you straight. Get all the brackets and the pulleys including the alternator mount and adjustment arm.
     
    Vanguard, Nov 28, 2012
    #6
  7. jpflat2a

    jpflat2a what's that noise?

    On what ?
     
    jpflat2a, Nov 28, 2012
    #7
  8. Vanguard

    Vanguard Take Off! Staff Member

    On the rental jeep. :D
     
    Vanguard, Nov 28, 2012
    #8