1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Towing a Jeep W/T90 & Spicer 18

Discussion in 'Early CJ5 and CJ6 Tech' started by gibson-d@sbcglobal.net, Feb 13, 2013.

  1. gibson-d@sbcglobal.net

    gibson-d@sbcglobal.net Member

    What do I do to flat tow a Jeep equipped with a T90 and Spicer T/C? Both in N, trans in N or t/c in N?
     
    gibson-d@sbcglobal.net, Feb 13, 2013
    #1
  2. brunester

    brunester Member

    I would just take off the drive shafts.
    But if you dont, put it in gear so it lubes itself as it goes.

    Also, there are a ton of threads on this, so a search might turn up more info
     
    brunester, Feb 13, 2013
    #2
  3. nickmil

    nickmil In mothballs.

    Trailer is best obviously but if that is not an option pull driveshafts like Brunester said. If for some reason that is not an option, make sure all gear boxes are full of fluid, transmission in gear, transfer case in neutral.

    Like Brunester said you can also do a search for "flat towing". LOTS of discussion there.
     
    nickmil, Feb 13, 2013
    #3
  4. gibson-d@sbcglobal.net

    gibson-d@sbcglobal.net Member

    Thanks guys, will do a search
     
    gibson-d@sbcglobal.net, Feb 14, 2013
    #4