1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Frame width

Discussion in 'Intermediate CJ-5/6/7/8' started by High5, Jan 29, 2014.

  1. High5

    High5 Member

    Hey guys been too long. I'm back working on the jeep and building bumpers. I have looked but was hoping someone could either measure or just tell me how wide our stock frames are inside to inside on the front end? Would really appreciate the help. Need to cut the holes for the mounts/d ring mounts and my jeep is in storage a couple hundred miles away.

    Thanks
     
    High5, Jan 29, 2014
    #1
  2. nickmil

    nickmil In mothballs.

    What year Jeep? If '75 and older 27 1/2" center to center of the frame rails.


    Sent from my iPhone
     
    nickmil, Jan 29, 2014
    #2
  3. High5

    High5 Member

    Sorry,
    Yes '75. I plan on having the mounts vertical and tight to inside of frame rail. Wish jeep was here could easily take measurements. Thanks for the help though.
     
    High5, Jan 29, 2014
    #3
  4. nwedgar

    nwedgar Now with TBI!

    The manual at oljeep.com will have a dimensional diagram in it.
     
    nwedgar, Jan 30, 2014
    #4
  5. PeteL

    PeteL If it wasn't for physics, and law enforcement... 2024 Sponsor 2023 Sponsor 2022 Sponsor

    Lots of measured drawings on google or bing images.
     
    PeteL, Jan 30, 2014
    #5