Rear Brake hose

I bought all three new hoses for my brakes system. I replaced the two front hoses, but when I looked at the back, it appears that the hose may be pressed into the tee. The new hose is a screw in type. I don't want to go twisting on the hose to see if it is removable, and possibly damage it, because it is old, but still serviceable. Does anyone know if that hose is in fact pressed into the tee? If it is, can I buy a identical hose? If so, where might I look. When I searched all I found was the screw in type.

Photo of OEM hose:



Photo of new hose:

 

It may be threaded, but has no hex. That seems unlikely.

If not, just buy a three-threaded "T" (?)

 

10-4. Thanks. I think I found a "T" with a bolt hole to anchor it at both Summit, and JEGS.

 

I used part 77034Z from Autozone. This is a similar hose to what you have on the Jeep. The hose is slightly longer and the mounting hole on the "t" is slightly larger. And yes, the hose is integrated in to the "t", no threads.

 

I got mine from the-jeep-guy. It screwed into the T.

 

The autozone hose is just 1 1/2" longer, and available locally. Thanks.