Replacing the lights wiring on the grille

Hey guys,

I am trying to replace the light wiring on the grille where the headlights and parking lights are placed. They were burned during an engine fire in the mid nineties and the headlights weren't needed around the farm until it's restoration, now. I was hoping someone could supply me with a place where I could replace all the wiring including where the lights plugs into the wires.

Thanks!

 

Look up Walcks, they will make you a new harness, just let them know year make model, engine altenator and starter, and they will make it for you.

 

I'd suggest you make the part of the wiring harness that is missing. If you need the connectors, here is one place to look: http://www.repairconnector.com

The headlight connectors are pretty common. Dorman Products http://www.dormanproducts.com/gsear...keyword&q=headlight connector&start=25&num=25 has electrical connectors too. The headlight plug is described by the type of bulb that it connects to, ie a connector for a 4002. The rest is just colored wire.

 

One wire to each headlight for high beams, one wire to each headlight for low beams, and one wire to each headlight for ground.
One wire to each turn signal/parking light for park, one wire to each for turn signal and one ground wire. All of heavy enough gauge to handle the current.
I would suggest running 30 amp or 40 amp relays for high and low beam circuits.