Dauntless V6 distributor hold down

I lost my dizzy hold down so where can I find one or what other engines can I look for one from? Bob

 

Don't know about other engines....

iirc there are two different brackets for the dauntless..

Not saying that either one won't work.

 

I'll tell you if you promise to stop calling it a "dizzy".

 

Try putting an WTB ad in the classified section. Dan is right, there are 2 different styles. One is a 2-pronged, flat piece and the other looks like a rocker arm.

 

I apologize profusely.....Bob

 

Well then.

Auto zone has the prong-type
http://m.autozone.com/ignition/distributor-hold-down-clamp-performance

And here's the rocker-arm type for $27!!!
https://www.opgi.com/cutlass/C241196/

 

Thanks for the heads up on the OPG Olds clamp but I wasn't aware that a SBC clamp would work......Bob

 

I did a quick search for a Buick 350 and that one kept coming up. Looks like mine, so it might work.

Those prices are crazy. They weren't showing up on my phone. Check your local pick-n-pull.

 

TA Performance. Part: TA-1340A

 

I looked at the T/A part and wasn't sure whether just a bolt with an oversize washer was the best design.

 

That's what I have. Works great. Put an ad in the classified if you want original.

 

The design principle is the same wether it's a thick washer or something resembling a rocker arm. One contact point secures the distributor with a bolt and a piece of metal.