1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Flywheel dust cover

Discussion in 'Early CJ5 and CJ6 Tech' started by alleycat3677, Mar 26, 2016.

  1. Mar 26, 2016
    alleycat3677

    alleycat3677 Member

    Upstate NY
    Joined:
    Oct 10, 2015
    Messages:
    159
    So my clutch gets put in on Wednesday! Noticed my trans doesn't have a dust cover and you can see the flywheel on the bottom facing the engine. I just have to imagine that dust,dirt and crud will just ruin my new clutch and is probably what happened to the current one. Anyone know where I can purchase one. 1971 Dauntless 225. Thanks
     
    alleycat3677, Mar 26, 2016
    #1
  2. Mar 26, 2016
    scott milliner

    scott milliner Master Fabricator

    Seattle Wa.
    Joined:
    Dec 17, 2002
    Messages:
    2,362
    Won't hurt the clutch, but mud may sit in the bell housing.
     
    scott milliner, Mar 26, 2016
    #2
  3. Mar 26, 2016
    Twin2

    Twin2 not him 2024 Sponsor 2023 Sponsor 2022 Sponsor

    Virginia Beach, VA
    Joined:
    Apr 28, 2011
    Messages:
    5,425
    if you have no luck here on forum
    try here . have to scroll down
    Transmission
     
    Twin2, Mar 26, 2016
    #3
  4. Mar 26, 2016
    47v6

    47v6 junk wrecker! 2023 Sponsor 2022 Sponsor

    USA
    Joined:
    Oct 25, 2006
    Messages:
    5,801
    I have a real one here somewhere.... but I didnt before and i made one out of some thin sheet i had kicking round.
     
    47v6, Mar 26, 2016
    #4
  5. Mar 26, 2016
    Danefraz

    Danefraz Well-Known Member 2023 Sponsor 2022 Sponsor

    Chico CA
    Joined:
    Aug 11, 2012
    Messages:
    2,279
    I made a template and sent it to a member from mine (the v6 version). It'd be a while before I can get into that corner of the shed again...

    < Which engine? > yeah, re-read and see it's the v6.

    d
     
    Danefraz, Mar 26, 2016
    #5
New Posts