1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Clutch Linkage Issues (need To Fix Some Bubba Engineering)

Discussion in 'Early CJ5 and CJ6 Tech' started by TerdFurgeson, Nov 26, 2017.

Page 2 of 2
  1. Steve's 70-5

    Steve's 70-5 Active Member

    Was going with the rod and linkage system, after reading this going with the clutch cable. The Jeep has bracket on frame, all I need to do is install the bracket on the transfer case. My transfer case has oil in it, when I take the bolt out to bolt the bracket on it, will oil come out? If oil is coming out, what will be a good sealer to put on the bolt it so there is not a leak in the future?
     
    Steve's 70-5, Dec 30, 2017
    #21
  2. timgr

    timgr We stand on the shoulders of giants. 2022 Sponsor

    Don't know offhand, but if the hole is above the fill hole, no oil will come out.
     
    timgr, Dec 30, 2017
    #22
  3. tarry99

    tarry99 Member

    Pipe thread dope.............or Silicon will work..........a little bit will do you.
     
    tarry99, Dec 30, 2017
    #23
Page 2 of 2