1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

I Wanted To Up Date Everyone On The Build

Discussion in 'Intermediate CJ-5/6/7/8' started by johnD, Jul 20, 2018.

  1. johnD

    johnD FUBAR

    I place the tube on the frame.

    [​IMG]

    [​IMG]
    [​IMG]
    Then started primer the other parts!

    [​IMG]

    [​IMG]

    [​IMG]
     

    Attached Files:

    johnD, Jul 20, 2018
    #1
    Muzikp, Rich M. and TuxParkIV like this.
  2. johnD

    johnD FUBAR

    I sprayed my tube and other parts with a spray gun. First time doing something like this! I used 2k urethane from Eastwood. The gun from Eastwood also, but it was clogging at the tip. So here are the pic.

    upload_2018-7-26_17-28-42.png
    upload_2018-7-26_17-28-55.png

    upload_2018-7-26_17-29-24.png

    upload_2018-7-26_17-29-38.png

    upload_2018-7-26_17-29-55.png
     
    johnD, Jul 26, 2018
    #2
    loootninja, heavychevy and Muzikp like this.
  3. sterlclan

    sterlclan Member 2024 Sponsor 2022 Sponsor

    clogging at the tip means paint too thick,or way too fast of a reducer.or low air pressure
     
    sterlclan, Jul 26, 2018
    #3
  4. johnD

    johnD FUBAR

    Thanks!
     
    johnD, Jul 26, 2018
    #4
  5. heavychevy

    heavychevy Sponsor

    Looking good.!!
     
    heavychevy, Jul 26, 2018
    #5