1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

high angle universal joint

Discussion in 'Early CJ5 and CJ6 Tech' started by 67cj5, May 3, 2005.

  1. May 3, 2005
    67cj5

    67cj5 Member

    Oregon
    Joined:
    Oct 15, 2004
    Messages:
    347
    Has anyone ever heard of these high angle universal joint? I have set my oinion angle and everything looks good, But worried if I articulate really hard I might find the lower end of travel on the universal joint from the dana 18 end. i think these are offset to allow for more clearance.I dont htink I really need these, but I dont like breaking parts when on the trails. I have a tendancy of overbuilding everything.Thanks in advance
     
    67cj5, May 3, 2005
    #1
  2. May 4, 2005
    lynn

    lynn Time machine / Early CJ5 HR Rep Staff Member

    Huntingdon PA
    Joined:
    Sep 20, 2002
    Messages:
    3,437
    I've heard of them, and have seen pics, but haven't heard of anyone using them, haven't read any trail reports... prolly some on POR, but haven't checked.
    if you decide to go with them, consider a write up with pics for the board... :)
    Good luck!!
     
    lynn, May 4, 2005
    #2
  3. May 4, 2005
    67cj5

    67cj5 Member

    Oregon
    Joined:
    Oct 15, 2004
    Messages:
    347
    Oh definately. i will post as much info as I can. I just cant find any info on the subject.
     
    67cj5, May 4, 2005
    #3
  4. May 4, 2005
    timgr

    timgr We stand on the shoulders of giants. 2022 Sponsor

    Medford Mass USA
    Joined:
    Aug 10, 2003
    Messages:
    23,596
    timgr, May 4, 2005
    #4
New Posts