1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Brake hose/knuckle clearance

Discussion in 'Early CJ5 and CJ6 Tech' started by Bob, May 7, 2005.

  1. May 7, 2005
    Bob

    Bob Member

    Northern California
    Joined:
    Sep 23, 2002
    Messages:
    439
    As I was cleaning up parts a little while ago, I wanted to test fit my 11" drums on my new "former disc" '81 D30 and discovered a clearance problem with the brake hose and the caliper ear on the knuckle. So, I was wondering if I could swap the passenger side wheel cylinder with the driver's so that the hose would come in from the front and not towards the ear in the rear. Is there any problem with switching wheel cylinders from side to side?
     
    Bob, May 7, 2005
    #1
  2. May 7, 2005
    jpflat2a

    jpflat2a what's that noise?

    Hermosa, SD
    Joined:
    Jul 30, 2003
    Messages:
    8,524
    no sir
     
    jpflat2a, May 7, 2005
    #2
  3. May 7, 2005
    Bob

    Bob Member

    Northern California
    Joined:
    Sep 23, 2002
    Messages:
    439
    Thanks Jim!
     
    Bob, May 7, 2005
    #3
New Posts