1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Quadratrac Axle Drive Flange Dust Cap Nut Covers

Discussion in 'Intermediate CJ-5/6/7/8' started by 47v6, Jan 27, 2023.

  1. Jan 27, 2023
    47v6

    47v6 junk wrecker! 2023 Sponsor 2022 Sponsor

    USA
    Joined:
    Oct 25, 2006
    Messages:
    5,801
    I have a set of drive flanges from a D30 quadratrac hub. Are the dust cap nut covers the same ID as Dana D44 or 41 or AMC 20 hub nut covers?

    If they are not, what are the differences or substitutions for the quadratrac ones?
     
    47v6, Jan 27, 2023
    #1
  2. Jan 28, 2023
    jpflat2a

    jpflat2a what's that noise?

    Hermosa, SD
    Joined:
    Jul 30, 2003
    Messages:
    8,524
    The front drive flange covers would be the same for the Dana axles.
     
    jpflat2a, Jan 28, 2023
    #2
    47v6 likes this.
  3. Jan 28, 2023
    nickmil

    nickmil In mothballs.

    Happy Valley, OR
    Joined:
    Sep 23, 2002
    Messages:
    12,529
    The ones for a tapered rear will work. The original drive flange covers were shallower so don’t stick out quite as much. Most people would never know the difference. 1/2”-3/4” difference.
     
    nickmil, Jan 28, 2023
    #3
    Ol Fogie and 47v6 like this.
  4. Jan 28, 2023
    47v6

    47v6 junk wrecker! 2023 Sponsor 2022 Sponsor

    USA
    Joined:
    Oct 25, 2006
    Messages:
    5,801
    Thanks!
     
    47v6, Jan 28, 2023
    #4
New Posts