1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

New (to Me) 12,000# 4-post Lift

Discussion in 'The Tool Shed' started by Jon B., Sep 25, 2023.

  1. Sep 25, 2023
    Jon B.

    Jon B. Retired three times; still working.

    SW Minnesota
    Joined:
    Apr 6, 2022
    Messages:
    255
    If it’s as advertised, I’ll be bringing home a used 12,000# Rotary drive-on lift on Wednesday!

    The ceiling in my shop is 13-14 feet where I’ll set it up, so it should work out. There’s a 100 Amp panel with 240v, so I can run a line to the pump motor.

    And… A local heating contractor will have a good, used Ruud LP gas furnace for me in a couple of weeks. 90%+ efficient, even, so just PVC intake and exhaust.

    Finally, at the ripe young age of 69 (yesterday!), I’m about to enjoy a really nice shop. It’s good to be me!

    Jon B.
     
    Jon B., Sep 25, 2023
    #1
    Ol Fogie, Dwins1, Dave Deyton and 12 others like this.
  2. Sep 26, 2023
    lhfarm

    lhfarm Sponsor

    Joined:
    Nov 27, 2006
    Messages:
    218
    I have a few years on you and I'm planning to build my dream shop with a lift this spring. Too hard to get on the floor but I'm not ready to stop wrenching.

    Send pictures!
     
    lhfarm, Sep 26, 2023
    #2
    Ol Fogie, Dwins1, Dandy and 3 others like this.
  3. Sep 26, 2023
    Jeepenstein

    Jeepenstein Me like Jeep.. 2024 Sponsor

    North Central FL
    Joined:
    Jun 15, 2003
    Messages:
    2,156
    Nice man, I just put in a 12K two post lift, it's running, still adjusting a little but all in all it's fantastic.. Good luck man!
     
    Jeepenstein, Sep 26, 2023
    #3
    Ol Fogie, Dwins1, Dandy and 3 others like this.
  4. Sep 26, 2023
    Warloch

    Warloch Did you say Flattie??? Staff Member

    Falcon, CO
    Joined:
    Mar 4, 2003
    Messages:
    5,470
    My ceilings aren't tall enough for a good lift like that. Have had to do with the shorter MaxJax. Either way - I couldn't do what I "attempt" to do without it now days.

    Good for you.
     
    Warloch, Sep 26, 2023
    #4
    Ol Fogie, Dwins1, Dandy and 1 other person like this.
  5. Sep 27, 2023
    Jon B.

    Jon B. Retired three times; still working.

    SW Minnesota
    Joined:
    Apr 6, 2022
    Messages:
    255
    It’s home! Needs a good cleaning and some paint but it appears to be sound.

    It will be a few weeks before it gets set up - lotsa things on the “honey do” list that have a higher priority…

    Jon B.
     
    Jon B., Sep 27, 2023
    #5
    Dwins1, Dandy, Fireball and 2 others like this.
  6. Jan 10, 2024
    Jon B.

    Jon B. Retired three times; still working.

    SW Minnesota
    Joined:
    Apr 6, 2022
    Messages:
    255
    Update!
    It’s installed and operational. I lifted my Chevy 3500 Duramax to change oil a couple of weeks ago.

    Here’s a pic. SxS is Son 2’s; we’re storing it for the winter.

    6C2D2405-6A9F-4DB9-B197-9E2744D6EB60.jpeg

    Jon B.
     
    Jon B., Jan 10, 2024
    #6
    SKT, Ol Fogie, Dwins1 and 12 others like this.
  7. Jan 11, 2024
    Jeepenstein

    Jeepenstein Me like Jeep.. 2024 Sponsor

    North Central FL
    Joined:
    Jun 15, 2003
    Messages:
    2,156
    Yeah man, it's a life changer.. Mine has definitely improved my shop for sure.. I've had the ram 3500 on mine with no issues..
     
    Jeepenstein, Jan 11, 2024
    #7
    Ol Fogie, Dwins1 and vtxtasy like this.
  8. Jan 17, 2024
    termin8ed

    termin8ed I didn't do it Staff Member

    Mason, MI
    Joined:
    Dec 22, 2002
    Messages:
    4,422
    With the uhm, patina, on that thing I'd think you got the old drive in hoist from last dealership I worked at:D
    I really liked my old inground center post lift we had at another dealer. Worked good on everything with no posts in the way unless you found out you sold something that involved pulling a transfercase or trans
     
    termin8ed, Jan 17, 2024
    #8
    ITLKSEZ, Ol Fogie, dozerjim and 1 other person like this.
  9. Jan 17, 2024
    Jon B.

    Jon B. Retired three times; still working.

    SW Minnesota
    Joined:
    Apr 6, 2022
    Messages:
    255
    Yeah, it’s a rusty old pig. It was probably condemned by OSHA and had to be replaced.
    The safety locks could use some work… When it’s in the air, I put a 4x4 under each corner!

    Jon B.
     
    Jon B., Jan 17, 2024
    #9
    Ol Fogie, dozerjim and Dwins1 like this.
  10. Jan 17, 2024
    Dave Deyton

    Dave Deyton Member

    Fuquay-Varina, NC
    Joined:
    Oct 12, 2003
    Messages:
    862
    That looks most handy. I would love to have a lift, but my ceiling is only about 7 feet in the garage.


    Dave
     
    Dave Deyton, Jan 17, 2024
    #10
    Ol Fogie and Dwins1 like this.
  11. Jan 18, 2024
    Dwins1

    Dwins1 Member

    Port Richey, Florida
    Joined:
    Jun 20, 2022
    Messages:
    296
    One day when I grow up and build my dream shop that lift is on the top of the list.. congratulations
     
    Dwins1, Jan 18, 2024
    #11
    Ol Fogie and vtxtasy like this.
  12. Jan 19, 2024
    Lockman

    Lockman OK.....Now I Get It . 2024 Sponsor 2023 Sponsor 2022 Sponsor

    Silver Hill,...
    Joined:
    Dec 4, 2018
    Messages:
    2,707
    Good for you, Man. Happy Birthday, Jon B . Here's mine :
    Finnaly.jpg ....... Best thing I've ever done for my 'Ol self !
     
    Lockman, Jan 19, 2024
    #12
    dozerjim, Dwins1, WTn800 and 3 others like this.
  13. Jan 19, 2024
    Dave Deyton

    Dave Deyton Member

    Fuquay-Varina, NC
    Joined:
    Oct 12, 2003
    Messages:
    862
    That lift looks good, but sure better with that cool Jeep on it.
     
    Dave Deyton, Jan 19, 2024
    #13
    dozerjim, Lockman, Dwins1 and 3 others like this.
New Posts