Traveler Wireless Remote For Warn 8274 Winch?

I'm doing some research on replacement/ upgrade winch remotes for the Warn 8274. I came across this and i'm wondering if these winches being the same trailer connection as the Warn winches have the same pinout on the plug?
Does anyone have the Warn pinout?

https://www.tractorsupply.com/tsc/product/traveller-wireless-control-with-big-emitter-1172307

 

The pinout connections are easy to find. I would cut the plug off the cord and hard wire the receiver to the relay.
This would give a cleaner look and keep the wiring out of the way.
With the long cord it could be mounted in the grill. There are plenty of other options to get a remote and some
have 2 controllers. Hot+ Grd.- Power in and Power out for the receiver. Be aware that Warn used a couple of
different plugs and wiring colors. Always verify connections.
Remotes:
https://www.amazon.com/s?k=remote+w...remote+winch+control+jeep,aps,145&ref=sr_pg_1

Warn Plug: Single solenoid

Warn Plug: 4-Solenoid

 

Thinking on this a little more. If you decide to hardwire the receiver, an insulated toggle switch breaking the
red wire to the receiver and located in an easily accessible location, may be a good idea. Cuz China.

 

Cutting the cord echoes the instructions for use of the receiver on the smaller Traveller winches. If this pans out I will definitely have hard wired in-cab controls and an isolation switch for the receiver.

 

Did win the auction or win the lottery?

 

14 &1/4 hrs left and still winning with the first bid I entered. Doing a lot more research on what I think it needs and costs to get it working and installed so I can make a decision on my final walk away number...

 

So far I know it needs gutted and cleaned. It Does not have any remote, will likely need Bushings, brake lining, couple solenoids (i figure 2 new to have confidence for power in.
I have a coworker that can give advice on the motor, local motor and alternator shops, the cables and wire rope will need replaced. I found the mounting plate link earlier today, still in the air on new poly or steel rope but that's not a decision I need to make right away.

 

I hope it works out in your favor and you do a build series on it. It will be a great project at the right price point.
It has to be the most modded winch ever made.