Oil filter engine bracket pic

Anyone got a pic of the oil filter bracket for an f head?

 

Can I get one off of you? I need one. Found this,http://cgi.ebay.com/ebaymotors/ws/e...&item=7997937734&rd=1&sspagename=STRK:MEWA:IT is this one, doesn't look right.

 

cool thanks

 

I just bought a mount from Walck's, new for ~$25., for the L head and it looked that. Has the mounting holes for the head studs but my stock filter can doesn't look like that one. Maybe it's a mixture.

 

Greg, if you don't already the pic and info, I'll go shoot mine here in a minute. The can looks about right, the bracket isn't anything I recognize for a 61 F. Back in a bit.

 

cool thanks Stu, I didn't think that looked right

 

Hum...no bracket at krage

 

Almost there, hang on......

 

Im hangin R)

 

OK, let's try this:

Top angle iron is 1 x 1 1/2 X 6 1/2 long, ends angle cut for clearance.

Side plate is 5 long x 3 1/2 high in the front angled to 4 1/4 or so in the rear, for clearance. Oil fill tube bolts to the back of this plate also.

 

Hum...thanks alot Stu...now all I have to do is find one, or I could make one...hum

 

How thick is that...1/8 inch?

 

cool ty John

 

1/8 is good. I figured a homemade job would be where you'd wind up. Pretty easy pieces, if you have access to material and even simple tools. If not, you know what you're looking for, anyway! Good luck! Need anything else, holler.

 

Thanks buddy 's to all

 

Walck's would have those, wouldn't he?