1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Newbie

Discussion in 'Early CJ5 and CJ6 Tech' started by ss70l78, Oct 8, 2005.

Page 2 of 2
  1. Oct 10, 2005
    53Flattie

    53Flattie Intigator

    Easley, SC
    Joined:
    Sep 23, 2002
    Messages:
    855
    Welcome from just down Hwy 276 in Easley, SC (near Greenville). I grew up around the Table Rock/Ceasars Head area. Beautiful country up that way. My grandmother grew up in Brevard. One day I'll inherit some property on East Fork, just behind the Conestee Falls area.

    If you need anything - give a yell. For junkyard Jeep parts, check with Iron Man at 864.878.2903 (Pickens County). Be sure to make the trip down to get the stuff. I wouldn't trust them to ship it (at least not in a timely fashion).

    Like the others, I'd love to see pics of your ride.
     
    53Flattie, Oct 10, 2005
    #21
  2. Oct 10, 2005
    53Flattie

    53Flattie Intigator

    Easley, SC
    Joined:
    Sep 23, 2002
    Messages:
    855
    BTW: The roll bar from any '75 or older will work (if it's the "stock" single hoop with two down-tubes).
     
    53Flattie, Oct 10, 2005
    #22
  3. Oct 10, 2005
    ss70l78

    ss70l78 New Member

    Joined:
    Oct 8, 2005
    Messages:
    10
    Thanks guy's. My son is going to show me how to send some pics. I have had a jeep in the past, but never seen a four speed till I come across this one.
     
    ss70l78, Oct 10, 2005
    #23
  4. Jan 11, 2006
    ss70l78

    ss70l78 New Member

    Joined:
    Oct 8, 2005
    Messages:
    10
    Please see attached pics, let me know if you can't see them
     
    ss70l78, Jan 11, 2006
    #24
  5. Jan 11, 2006
    neptco19

    neptco19 That guy....

    Athens, GA
    Joined:
    Sep 26, 2003
    Messages:
    1,381
    Looks good!!

    Welcome from just down the mtn. in Hickory. If you need any parts I believe there are enough of us close enough we might have it laying around.
     
    neptco19, Jan 11, 2006
    #25
  6. Jan 12, 2006
    lynn

    lynn Time machine / Early CJ5 HR Rep Staff Member

    Huntingdon PA
    Joined:
    Sep 20, 2002
    Messages:
    3,437
    Pics came through just fine... Thanks!!
    Looks like a pretty good rig.
    What are your plans?
    Did you make a decision on the brakes?
    Have you made any progress since you posted in October?
     
    lynn, Jan 12, 2006
    #26
  7. Jan 12, 2006
    cj5 buggy

    cj5 buggy Member

    hardeeville, SC
    Joined:
    Dec 12, 2003
    Messages:
    403
    Looks Good to me... Welcome from GA...
     
    cj5 buggy, Jan 12, 2006
    #27
  8. Jan 12, 2006
    ss70l78

    ss70l78 New Member

    Joined:
    Oct 8, 2005
    Messages:
    10
    I have redone the 9 inch brakes with new wheel cylinders, shoes were like new and turned the drums. Rebuilding the bell crank, and the carb. I have a question about the windshield gasket. Can anybody identify what I need to replace the gasket? and what syle of mirrors for the side.
     
    ss70l78, Jan 12, 2006
    #28
  9. Jan 14, 2006
    Griff

    Griff Member

    Sylacauga ,Alabama
    Joined:
    Oct 11, 2004
    Messages:
    66
    Welcome from Sylacauga,Alabama. Smittybilt makes a roll bar that bolts to the fenderwells
     
    Griff, Jan 14, 2006
    #29
  10. Jan 14, 2006
    Badcop

    Badcop I Just look New.....

    West Point, UT
    Joined:
    May 5, 2005
    Messages:
    95

    Ive found the best place to get parts is jeepdoc.com or 4wd.com. I too have a 63 with the f head and 98 trans, in the process of mating a 225 dauntless to it and putting it all back together.

    Welcome btw...
     
    Badcop, Jan 14, 2006
    #30
Page 2 of 2
New Posts