Spring Perch

I found a rear 44 axle that was changed to spring over for the wider wrangler springs. I want to weld on the original spring mounts under the axle but I don't have any decent spring perches left that weren't all hacked up from removal. Anyone know where I can get a pair to weld on (the narrow ones for my '74)? Interesting that this donor axle has interior shock mounts while the factor CJ used the spring plates -- DJ, scout?

Thanks,

 

Don't know about your area but R&P stocks them at 503-557-8911. Think they are about $20 or so a pair. By the way, you need 1 3/4" wide pads as that is what the original CJ springs are all the way up to '75.
Nickmil.

 

You can also make some, thats what I ussually do. Find some 1 3/4" thick wall square tube, cut to length, use a hole saw to cut the axle curve, cap the ends and drill a center pin hole.

Kevo

 

Thanks,

I'll give 'em a ring and order a pair.

 

4 wheeldrive hardware also has them.I'v got most of my parts from them. Very nice to deal with.

 

Quadratec also has them for $19.95 a set. 800-745-5337. Ask for a free catalog on the cj stuff.

 

Hey MNTrailboss...Nice lookin' rig...don't see to many JetSet Blue ones out there. I think nickmil is one of us...but not 100% sure.

 

Actually, my CJ-5 is Krylon True Blue . I'm planning on painting the '6 Jetset Blue or a color very close to it though! Nickmil.