1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Transfercase?

Discussion in 'Early CJ5 and CJ6 Tech' started by hickntick, Dec 23, 2005.

  1. Dec 23, 2005
    hickntick

    hickntick New Member

    north west mo
    Joined:
    Jan 14, 2005
    Messages:
    41
    Should the output shaft gear slide onto the output shaft easy or hard mine is hard. Mite be wrong but I think it should move. Thanks.
     
    hickntick, Dec 23, 2005
    #1
  2. Dec 23, 2005
    Glenn

    Glenn Kinda grumpy old man Staff Member

    Apopka, Fl
    Joined:
    Sep 21, 2002
    Messages:
    12,379
    Should slide easily. Is yours damaged on the splines or something else wrong? If you have new parts you might have to lightly file the splines.
     
    Glenn, Dec 23, 2005
    #2
  3. Dec 24, 2005
    AKCJ

    AKCJ Active Member

    Fairbanks, Alaska
    Joined:
    Aug 12, 2003
    Messages:
    1,035
    I ran into this problem with the new spud shaft on the Novak adapter. I put the shaft on a (wood) lathe and "sanded" it down. Worked very well.

    Talking to the guys at Novak there's a lot of variability between different gears and different shafts so it's not an uncommon problem.
     
    AKCJ, Dec 24, 2005
    #3
  4. Dec 25, 2005
    hickntick

    hickntick New Member

    north west mo
    Joined:
    Jan 14, 2005
    Messages:
    41
    Thanks for the info. I took it apart to install the twin stick I got from nickmil ,so its been that way for awhile. Might try honing the inside of the gear.
     
    hickntick, Dec 25, 2005
    #4
New Posts