1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Power Steering Pump Bracket

Discussion in 'Early CJ5 and CJ6 Tech' started by Erik Heiken, Dec 24, 2005.

  1. Dec 24, 2005
    Erik Heiken

    Erik Heiken New Member

    Joined:
    Sep 26, 2005
    Messages:
    17
    I noticed the bolt pattern (or lack there of) on the ODD-FIRE I have is different from what others have spoke of. I do not have a three bolt pattern on the front of the drivers side head. On mine there is one hole towards the top of the head near the valve cover gasket and the other is on the side of the head, forward of the header ( I don't have the ability at the moment to provide any pictures).

    By description alone can anyone tell me if there is a pump bracket out there that will fit this. I do believe I have seen a pump bracket from a 350 CID Oldsmobile "88" with this pattern, but can't swear by it.

    PLEASE HELP!
     
    Erik Heiken, Dec 24, 2005
    #1
  2. Dec 24, 2005
    66cj5

    66cj5 Jeep with no name

    NorthWest Indiana
    Joined:
    Sep 10, 2003
    Messages:
    2,084
    might have bosses cast in the block but no holes drilled/tapped. pics would help.
     
    66cj5, Dec 24, 2005
    #2
New Posts