1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Sheet Metal

Discussion in 'Builds and Fabricators Forum' started by blue75, Feb 15, 2006.

  1. blue75

    blue75 New Member

    Hey fellers,
    Wondering if someone could tell me what size/guage sheet metal I need to buy to patch some side panels on the old jeep. Any help would be appreciated.
     
    blue75, Feb 15, 2006
    #1
  2. mb82

    mb82 I feel great!

    The stuff I bought that was preformed panels was about 20gauge. Personally I would have used 16 for the lower rockers since it is a little tougher.
     
    mb82, Feb 15, 2006
    #2
  3. MississippiDave

    MississippiDave New Member

    I used a sheet of 18 ga. mild steel. ($43 for a 4X8 sheet at my local steel supplier). Worked great and was the same gauge as the original. Dave
     
    MississippiDave, Feb 15, 2006
    #3
  4. eddyt

    eddyt Member

    The replacement panel I got came in 18 ga, It worked out great.
     
    eddyt, Feb 16, 2006
    #4
  5. wminmi

    wminmi Overgrown child at Work

    16 gauge is what i'm using
     
    wminmi, Feb 16, 2006
    #5
  6. jd7

    jd7 Sponsor

    18 gauge
     
    jd7, Feb 16, 2006
    #6