1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Dana 20 shift rail plugs

Discussion in 'Intermediate CJ-5/6/7/8' started by Jokenring, Feb 20, 2008.

  1. Feb 20, 2008
    Jokenring

    Jokenring Member

    Wetside of...
    Joined:
    Jan 17, 2006
    Messages:
    83
    Anyone know where I can source these? They are the little plugs that cover the holes on the shift rail that allow the interlock pills to be put or taken out.
     
    Jokenring, Feb 20, 2008
    #1
  2. Feb 20, 2008
    hudsonhawk

    hudsonhawk Well-Known Member

    North Texas...
    Joined:
    Feb 4, 2005
    Messages:
    1,944
    I used a dollup of RTV on each when I rebuilt mine. It's still going strong 3 years later.
     
    hudsonhawk, Feb 20, 2008
    #2
  3. Feb 20, 2008
    Posimoto

    Posimoto Hopeless JEEP Addict

    Minden, Nevada
    Joined:
    Aug 7, 2003
    Messages:
    4,541
    Posimoto, Feb 20, 2008
    #3
  4. Feb 21, 2008
    Jokenring

    Jokenring Member

    Wetside of...
    Joined:
    Jan 17, 2006
    Messages:
    83
    Not the ones on the top for the ball detents to get the ball and spring out. These are on the side of the right rail (if standing behind the xcase) They are a press in type about a 1/4" to 5/16" in dia.

    Hudsonhawk, you say some silicone works good for that? Probably be the route I go. I was going to try and weld them closed, but decided against it when I realized I was way too good of a welder to mess with cast. :D:D
     
    Jokenring, Feb 21, 2008
    #4
New Posts