1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

gear ratios - factory T98 on V6

Discussion in 'Early CJ5 and CJ6 Tech' started by mtntinker, Jun 14, 2004.

  1. Jun 14, 2004
    mtntinker

    mtntinker New Member

    northern Colorado
    Joined:
    Apr 14, 2004
    Messages:
    30
    I've been cruisin' the FAQ, Jeep Tech, and Ludel's 'bible', but all I can find on the (rare) T98 that shipped with a few V6's is that first gear is 4.02:1. Nothing on 2nd, 3rd. 4th, reverse. (I'm not even finding that info for the Ford T98 with the 6.3 1st).

    Anybody have this info??

    Thanks much,
    Van
     
  2. Jun 14, 2004
    timgr

    timgr We stand on the shoulders of giants. 2022 Sponsor

    Medford Mass USA
    Joined:
    Aug 10, 2003
    Messages:
    23,793
    Mmm. I don't think the V6 came with a T98. Close ratio T18, maybe. I thought that only the F4s were delivered with T98s, and they were wide ratio.

    Novak lists the ratios for the T18 models. I think the T98 ratios are the same as the wide ratio T18.
     
  3. Jun 14, 2004
    timgr

    timgr We stand on the shoulders of giants. 2022 Sponsor

    Medford Mass USA
    Joined:
    Aug 10, 2003
    Messages:
    23,793
  4. Jun 14, 2004
    lynn

    lynn Time machine / Early CJ5 HR Rep Staff Member

    Huntingdon PA
    Joined:
    Sep 20, 2002
    Messages:
    3,437
    I show the T-98 gear ratios are as follows:
    1st=6.40
    2nd=3.09
    3rd=1.69
    4th=1.00

    This is from info published by AA in their engine and transmission conversion instruction manual, booklet JP008 circa April 1995 :)
    This source does not show a 4.03 T98, but does show a 4.03 T18.
     
  5. Jun 14, 2004
    mtntinker

    mtntinker New Member

    northern Colorado
    Joined:
    Apr 14, 2004
    Messages:
    30
    ;)

    Thanks much, folks!

    Van
     
New Posts