1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Toyota Starter on F134...fact!

Discussion in 'Early CJ5 and CJ6 Tech' started by lynndiwagon, Jul 12, 2008.

  1. Jul 13, 2021
    matt johnson

    matt johnson Caretaker of family Jeeps 2021 Sponsor 2020 Sponsor

    chesapeake, va
    Joined:
    Sep 3, 2003
    Messages:
    215
    Ok . I'm confused. Can some one please post a
    Part # as source for immediate availability.
    Will Duralast 16224S work?
    Thanks
     
    Last edited: Jul 13, 2021
  2. Jul 13, 2021
    45es

    45es Member 2022 Sponsor 2021 Sponsor 2020 Sponsor

    Naches, WA
    Joined:
    Mar 31, 2007
    Messages:
    987
    Matt, Daryl did that in the previous post #120.
     
  3. Jul 14, 2021
    matt johnson

    matt johnson Caretaker of family Jeeps 2021 Sponsor 2020 Sponsor

    chesapeake, va
    Joined:
    Sep 3, 2003
    Messages:
    215
    Yes he did. I just wanted to confirm. Many thaks!. Uyou.guys always come through, and it's much appreciated! On it's way. Thanks again folks!
     
  4. Jul 14, 2021
    Puddle Jumper

    Puddle Jumper Rattle Can Master Painter

    Camas, WA
    Joined:
    Sep 22, 2020
    Messages:
    146
    Don't need one right now but I am going to order one just to have it on hand. :bananatool:
     
  5. Jul 14, 2021
    matt johnson

    matt johnson Caretaker of family Jeeps 2021 Sponsor 2020 Sponsor

    chesapeake, va
    Joined:
    Sep 3, 2003
    Messages:
    215
    Amazon, dirt cheap, and I keep the core.
     
  6. Feb 14, 2022
    andy howell

    andy howell Member

    Thomastown...
    Joined:
    Oct 25, 2008
    Messages:
    107
    Hey a quick question about flywheels & ring gears.
    Are ring gears interchangeable between flywheels or are they flywheel specific?
    What yrs were the different flywheel / ring gear combos available?
    Any yr overlaps?
    I keep all this info in my Jeep folders & I don't recall this subject discussed in relation to the Toyo starter mod.
    Thanks!
     
  7. Feb 15, 2022
    garage gnome

    garage gnome ECJ5 welder 2021 Sponsor 2020 Sponsor

    Western MA
    Joined:
    Jun 19, 2009
    Messages:
    2,792
    MB, GPW, CJ2A and very early CJ3A's had smaller ring gears. These are easily identified by the bell housing which has the starter bushing built in. From 1950 and up, the starters were self supported and the ring gear size was increased. The toyota starter only works with the 1950 and up flywheels. See my post in my build thread about the hard way of figuring this out. Ted is a 1949 3A, so he had a lot of leftover 2A parts, one being the small flywheel and older starter. Also, in the CJ5 era, the change was made from a 8.5" clutch to a 9.25" clutch, ring gear stayed the same.

    http://www.earlycj5.com/xf_cj5/index.php?threads/107180/page-6
     
    tripilio likes this.
  8. Feb 15, 2022
    CHUGALUG

    CHUGALUG Member

    Silverton, OR
    Joined:
    May 11, 2019
    Messages:
    218
    The 9.25" clutch was ONLY an option in the 60's The Toyota Starter works with the 129 tooth ring gear and the Later 3A bell housing (the one with 3) 5/16" bolt holes on either side (used with the M-38 Waterproof Clutch) I have a 9.25" clutch added to my Late (dual hole drilled flywheel that will take either clutch) 129 tooth ring gear and Late Bellhousing. It works perfectly. I only had to ream out the top mounting bolt to about 7/16 for it to fit.
     
  9. Feb 15, 2022
    Howard Eisenhauer

    Howard Eisenhauer Super Moderator Staff Member

    Tantallon, Nova...
    Joined:
    Nov 22, 2003
    Messages:
    7,651
    I think it actually came along a bit earlier than that, I had one on a '59 CJ6.

    Had some kind of a strange hieroglyphic type marking on the flywheel that I've never been able to decipher. :confused:

    Flywheel WTF_2..JPG

    Flywheel WTF_1jpg.JPG
     
  10. Feb 15, 2022
    timgr

    timgr We stand on the shoulders of giants. 2022 Sponsor 2021 Sponsor 2020 Sponsor

    Medford Mass USA
    Joined:
    Aug 10, 2003
    Messages:
    23,604
    Howard Hughes? :coffee: <jk>

    Maybe it came from that dealership in Riverside?
     
  11. Feb 15, 2022
    kenb

    kenb Cleverly disguised as a responsible adult

    Detroit
    Joined:
    Jan 22, 2019
    Messages:
    583
    When was IH making Willys engine parts? I'm confused
     
  12. Feb 15, 2022
    amboynut

    amboynut Member

    Chelatchie, WA
    Joined:
    Aug 25, 2021
    Messages:
    152
New Posts