1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Jeep Lean

Discussion in 'Early CJ5 and CJ6 Tech' started by Kevin D, Sep 15, 2009.

  1. Sep 15, 2009
    Kevin D

    Kevin D New Member

    Monroe, NY
    Joined:
    Jan 24, 2009
    Messages:
    36
    Don't get upset that I'm bringing up an age old subject. I have one question that I could not find the answer to through searches. I just installed a 2.5" Pro Comp lift into my 63 CJ5 and yes it has the driver's side lean. My question is has anyone tried re-arching the driver side to compensate for the lean? There are spring shops near me that will do this for a somewhat reasonable fee. Thoughts? Thanks.
     
    Kevin D, Sep 15, 2009
    #1
  2. Sep 15, 2009
    blevisay

    blevisay Oh Noooooooooooooooo! Staff Member

    Portland Tn.
    Joined:
    Sep 20, 2002
    Messages:
    4,350
    blevisay, Sep 15, 2009
    #2
  3. Sep 15, 2009
    Patrick

    Patrick Super Moderator Staff Member

    Los Alamos, NM
    Joined:
    Sep 22, 2002
    Messages:
    8,360
    Patrick, Sep 15, 2009
    #3
  4. Sep 16, 2009
    SIDSCJ

    SIDSCJ Jeep addict

    14th State
    Joined:
    Jun 25, 2004
    Messages:
    1,192
    I'd try a slightly longer shackle on the low side first. Re-arching one side to compensate may change the spring rate??
     
    SIDSCJ, Sep 16, 2009
    #4
New Posts