F134 spring for throttle

Got the day off.. sunny here in MO and working on the Jeep.. My F134 is missing the spring that keeps tension on the throttle linkage. The spring looks like it should be connected to the linkage that screws into the valve cover but I can't see where the other end of it should hook onto. Anyone have a pic of theirs that would shed some light on where it goes? Thanks!

 

Between the oil pump and the oil pressure sending unit there is a square headed pipe plug in the block. The head of the plug is drilled thru to accept the lower end of the spring. Spring connects there and goes up to the bellcrank mounted on the valve cover. Pic here:http://www.film.queensu.ca/Cj3b/Photos/Tech/HurricaneSideGrayscale.jpg

 

Hmmm I see I need to get one of them springs too. Thanks.

 

Found it.. got it hooked up.. works mo betta.. thanks!

 

I could never find a good pic like this one, but I suspected the spring should attach to that plug (mine has been changed and has no hole). But it sure seemed that the steering arm is right in the path of the spring going in that direction. So I made my own spring holder.