Front wheel bearing removal

Okay Folks.

This has been a real bear, but I'm getting more tools!!! I'm trying to R&R the front wheel bearings. I had an old Warn manual locking hub and thought I would do an R&R on it as well (Can't find an inst manual anywhere!!). I'm to the point of just one more piece to remove before I can start/complete the R&R process. BUT, I can't finger out how to remove this part. Its a ring of some type.

Here's a photo
http://www.thefitzpatrickclan.com/cj5/photos/wheelbearing1.jpg
http://www.thefitzpatrickclan.com/cj5/photos/wheelbearing2.jpg


Any ideas? I'm out of C4

 

should be allen screws inside that lock washer
you can see the holes where they are in the photo
take those out, or, loosen so that the nut will unscrew
I think that's what I see in the photos
be gentle

 

Here is a parts break down, It is the lower one.


Hope this helps.
Andrew

 

jpflat2a,

That would be the trick :tea:

Thanks. Now I have to take the hubs down and have the races R&R'd

Thanks Again

Fitz

 

Andrew,

Thanks for the parts breakdown.
Keep that bit of info in the CJ file

Fitz

 

If you're careful a brass punch will work as well. The ones Patrick posted work the best though.

 

More Tools!!

Found a kit at Northern Tools.

Thanks

Glen

 

x2 Patience is a virtue when dealing with older vehicles.