1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

clutch linkage

Discussion in 'Early CJ5 and CJ6 Tech' started by USMC-Ordie, Oct 30, 2004.

  1. Oct 30, 2004
    USMC-Ordie

    USMC-Ordie New Member

    Yuma Arizona
    Joined:
    Aug 20, 2004
    Messages:
    46
    I have made it throgh the driveshaft install and the brakes are done and good. My next dilemma is the clutch linkage. I have, as many of you know, a tube and lever type clutch. I think I put it back together correctly but I do not know. Does someone have a picture of what one looks like that is put together correctly. If not is there a way to check and see if the clutch is working without starting the motor. Unfortunately that is the next step in my process (Electeical). If there is a way to check this without continuing on I would like to do this. When I put the vehicle in gear it does not move and that is good. The bad thing is it does not roll in neutral either. I know there is something wrong and I need help with this one. Semper Fi and happy birthday to any former Marines out there.
     
    USMC-Ordie, Oct 30, 2004
    #1
  2. Oct 30, 2004
    Glenn

    Glenn Kinda grumpy old man Staff Member

    Apopka, Fl
    Joined:
    Sep 21, 2002
    Messages:
    12,391
    Not rolling in neutral wouldn't have anything to do with the clutch. Something else is up with that. Figure out that problem and then you can tell if the clutch is disengaging without it running. Just have it in gear and try to roll it with the clutch not depressed and then depressed.
     
    Glenn, Oct 30, 2004
    #2
New Posts