1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

anybody running a 80s cj power steering pump

Discussion in 'Flat Fender Tech' started by curbcrawler, Feb 17, 2011.

  1. curbcrawler

    curbcrawler Hacker

    On your sbc conversion? what bracket are you using? got any pics? thanks.
     
    curbcrawler, Feb 17, 2011
    #1
  2. timgr

    timgr We stand on the shoulders of giants. 2022 Sponsor

    Should be the same as any other GM/Saginaw steering pump. They are a commodity item.
     
    timgr, Feb 17, 2011
    #2
  3. nickmil

    nickmil In mothballs.

    Is there a reason you can't just use one with proper bracketry for a sbc?
     
    nickmil, Feb 17, 2011
    #3
  4. curbcrawler

    curbcrawler Hacker

    wasn't sure if the cj ps pump would use the same bracket as a gm ps pump.
     
    curbcrawler, Feb 17, 2011
    #4
  5. nickmil

    nickmil In mothballs.

    The bracketry works with the motor it's for because of offset, mounting hole differences, etc.
     
    nickmil, Feb 18, 2011
    #5
  6. curbcrawler

    curbcrawler Hacker

    I intend to go to a saganaw power steering setup on my sbc powered cj2a. So to be clear, I can use a jeep cj pump with a sbc bracket?
     
    Last edited: Feb 19, 2011
    curbcrawler, Feb 19, 2011
    #6
  7. timgr

    timgr We stand on the shoulders of giants. 2022 Sponsor

    The guts of the pump (ie function) will be the same, but the mounts on the reservoir could be different. If you have the pump on hand, try it.
     
    timgr, Feb 19, 2011
    #7