1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

? drums

Discussion in 'Early CJ5 and CJ6 Tech' started by mcclura, Mar 20, 2011.

  1. Mar 20, 2011
    mcclura

    mcclura Member

    roy ,washington
    Joined:
    Dec 21, 2010
    Messages:
    57
    these are 11" drums
    i know the one with the big hole is but it looks like the
    hub goes on the outside
    is this the only option for tapered axle,
    i know when
    i had nine " i was able to put drum over the hub.
    is the smaller for floating axle.
    [​IMG]
     
    Last edited by a moderator: Mar 20, 2011
    mcclura, Mar 20, 2011
    #1
  2. Mar 20, 2011
    nickmil

    nickmil In mothballs.

    Happy Valley, OR
    Joined:
    Sep 23, 2002
    Messages:
    12,530
    Hard to see on my I phone but the drum on the left looks like the center hole is smaller, I.e.
    Too small to fit the hub. If it is too small then you have the wrong drum. Where did you get them?
    Posted via Mobile Device
     
    nickmil, Mar 20, 2011
    #2
  3. Mar 20, 2011
    mcclura

    mcclura Member

    roy ,washington
    Joined:
    Dec 21, 2010
    Messages:
    57
    Came with 3b I bought ,
    in a box of stuff he gave me ,
    are 11" drums the hub on the outside because my 9" were
    On the inside ,
    where was able slide the drum off with leaving hub on axle
    Posted via Mobile Device
     
    Last edited by a moderator: Mar 20, 2011
    mcclura, Mar 20, 2011
    #3
  4. Mar 20, 2011
    nickmil

    nickmil In mothballs.

    Happy Valley, OR
    Joined:
    Sep 23, 2002
    Messages:
    12,530
    The bendix fit on the outside. The older Lockheed style fit in the back (cam style adjusters, non self adjusting)
    Posted via Mobile Device
     
    nickmil, Mar 20, 2011
    #4
  5. Mar 20, 2011
    mcclura

    mcclura Member

    roy ,washington
    Joined:
    Dec 21, 2010
    Messages:
    57
    thanks missed you at the show but i think you picked my extra set of backing plates from my buddy
     
    mcclura, Mar 20, 2011
    #5
  6. Mar 21, 2011
    66cj5

    66cj5 Jeep with no name

    NorthWest Indiana
    Joined:
    Sep 10, 2003
    Messages:
    2,084
    the ones on the left look like the 2wd ford truck drums that flaps ordered by mistake , when I went to 11" brakes on mine.
     
    66cj5, Mar 21, 2011
    #6
  7. Mar 21, 2011
    mcclura

    mcclura Member

    roy ,washington
    Joined:
    Dec 21, 2010
    Messages:
    57
    thanks that makes sense 2wd
     
    mcclura, Mar 21, 2011
    #7
  8. Mar 21, 2011
    54cj3b

    54cj3b Member

    evergreen colorado
    Joined:
    Jul 7, 2010
    Messages:
    236
    Those drums look just like the ones I just pulled off a 2wd dj5 postal jeep
    they matched right up for my 3b
    the drum with bigger hole slides right over the hub
    I know I have to re-drill 2 holes on each back plate but other than that they will fit
     
    54cj3b, Mar 21, 2011
    #8
New Posts