1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Water Pump By Pass Hose

Discussion in 'Early CJ5 and CJ6 Tech' started by bergy9, Mar 25, 2011.

  1. bergy9

    bergy9 Jeep Maffia, CJ 5 Chapter

    I am looking for either a NAPA part number, any other part number, or source for a Water Pump By Pass Hose for either a 225 or 231. I have found at least three different one that look like they may work in NAPA's site. Summit has a Gooodyear part #63726, and a Summit #GTR-63726 that looks correct, but I do not want to play hit and miss.
     
    bergy9, Mar 25, 2011
    #1
  2. Patrick

    Patrick Super Moderator Staff Member

    FWIW, I just use a piece of heater hose. Have been for 14 years (yes, I've replaced it more than once in that time..)
     
    Patrick, Mar 25, 2011
    #2
  3. Pack Rat

    Pack Rat Old Timer

    NAPA part number is 7333.
     
    Pack Rat, Mar 25, 2011
    #3
  4. bergy9

    bergy9 Jeep Maffia, CJ 5 Chapter

    That is what I have been attempting to do, but the hose seems to pinch. So that is why I want to find a molded one.
     
    bergy9, Mar 26, 2011
    #4
  5. bergy9

    bergy9 Jeep Maffia, CJ 5 Chapter

    Thank You, I'll look at that part number, also thought a 7447 might work.
     
    bergy9, Mar 26, 2011
    #5
  6. Jim302

    Jim302 Banned

    The port in the water pump is small. A small kink in the hose will hurt nothing. If you get the length exactly right, a piece of 5/8 heater hose will work with no kinks.

    The part from NAPA will probably need a minor trim to keep from kinking.
     
    Jim302, Mar 27, 2011
    #6