The KaiserWillys.com website states that the rims are 5 3/4". But it also states that tubes should be used. Any opinions on that? Can I mount a...
I've ordered a set of the 16" repops from KaiserWillys.com for my 66 CJ5 that is "almost" stock. It has a 2 1/2" lift underneath it. Original...
Can I mount 235/85r16's on a 16x6 re-pop from kaiserwillys.com ? Let me know what y'all think. Thanks,,,
KaiserWillys.com has new 16" steel wheels advertised, but they're OmixAda. I have heard to stay away from that manufacturer. It's the only place I...
greg74, thats a good looking jeep. Thanks for the pic. I think the 2 1/2" lift will be adequate to fit the 7.50's. PeteL, I say "restoration"...
I'm about 80% complete on a frame off restoration of my 66 CJ5. I have a 2 1/2" suspension lift on her right now. My question is this: I'm going...
Just ordered a set of 16" Steel Civilian Rims from KaiserWillys. I know that all of the original tires that were mounted on these rims required...
nickmil, you were right!!! I have the spacer behind the bearing versus in front of it. On FSM page 245, the spacer is numbered 33. So now the...
By spacer, do you mean the washer behind the nut? If so, yes its there. Just odd. Everything appears to turn freely in all gears until I "firmly"...
OK,so today I was mating up my stock DANA 18 transfer case to the stock T86AA. After "tightening" the rear transmission input nut,,,,,,, it all...
Thanks guys. The dashes from Double D look well made. I'll give them a shout. I can always count on some one here having an answer.
Anyone know of where I can get my hands on a dash panel for my 66? Haven't placed a "wanted' add up yet,,,, it will be my next move, but I'd...
Thanks guys,,,,, always great help here!!!!!
Got both the T86AA and DANA 18 cleaned up and painted. I'm ready to bolt them together and have purchased a seal kit from kaiserwillys.com. My...
Mr. Lane, You have a great looking jeep. I really like the stance of it. I noticed you said it had a 2 1/2" lift. I am working on a frame off...
Have you removed the cover from the ross steering box? The sector shaft assembly and incorporated pins have to be pulled away from the steering...
timgr, thanks for the reply. I can always count on good info here. Just curious,,,,, why are they so off-set?
Hope everyone can open this link,,,,, I'm a bit computer illiterate. Question - Does this look right. It's a replacement rear...
Mcruff- thanks for the reply. I can always count on good advice here.
What is "too tight"? I'm about to install a Pro Comp 2.5" lift on my 66. Anybody got a good idea on the proper torque to apply to the shackle bolts?
Separate names with a comma.