1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

62 with 3 screw drums. Drop right off?

Discussion in 'Early CJ5 and CJ6 Tech' started by ODBuffalo, Jan 30, 2015.

  1. Feb 18, 2015
    Glenn

    Glenn Kinda grumpy old man Staff Member

    Apopka, Fl
    Joined:
    Sep 21, 2002
    Messages:
    12,519
    x3!
     
  2. Feb 18, 2015
    baja4

    baja4 Member

    Joined:
    Aug 31, 2010
    Messages:
    85
    Pretty sure the front drums won't be to much trouble coming off, had them off before. If your going to replace that much, is this a good time to change to 11" brakes? Unless you want to keep it original. Glad to see your progress.
     
  3. Feb 19, 2015
    cookieman

    cookieman Member

    Colton,Calif
    Joined:
    Jan 31, 2005
    Messages:
    302
    That were common sense is used! and he said that drum was loose..I should said ....Put pressure on drum. those drum take a lot pressure ...I done a few brake jobs in last 50 years ...
     
  4. Mar 1, 2015
    ODBuffalo

    ODBuffalo Member

    Fort Wayne, IN
    Joined:
    Sep 29, 2014
    Messages:
    111
    Well I replaced shoes, cylinder and springs. Had to file down the hub to get the new drum over.

    My next question is about the 3 screws. If the screw heads arent perfectly flush with the drum is that a issue? Drill out the hole in the drum a little? New screws?

    thanks again
     
  5. Mar 1, 2015
    Howard Eisenhauer

    Howard Eisenhauer Administrator Staff Member

    Tantallon, Nova...
    Joined:
    Nov 22, 2003
    Messages:
    8,300
    How much did you file down the hubs? if you only cleared off the rust & ridges where you hit them with the hammer then the hub will center the drum & you don't need the screws at all.

    H.
     
  6. Mar 1, 2015
    Mike C

    Mike C Member

    Austin, TX
    Joined:
    Feb 19, 2007
    Messages:
    743
    That depends on the back of the wheel. If it rests on the screw heads, then they need to be down more. But the reality is that the screws really aren't needed to hold the drum on, the wheel will do that just fine.
     
  7. Mar 8, 2015
    ODBuffalo

    ODBuffalo Member

    Fort Wayne, IN
    Joined:
    Sep 29, 2014
    Messages:
    111
    Phase II. Got the rears rebuilt and moving up front.
    Do I need to remove the locking mechanism to get the drum off?
    Seems tight but it may be possible? Or not.

    Thanks

    [​IMG]
     
  8. Mar 8, 2015
    Chevallier87

    Chevallier87 Member

    Boise Idaho
    Joined:
    Apr 21, 2012
    Messages:
    230
    I can get my drums off without having to remove the locking hub, but just by inspecting the picture Im not sure this would be the case for yourself. Looks like a very tight tolerance there...
     
New Posts