Will the flywheel from the 225 fit the 231? Or is the bolt pattern different? I swaped my 225 out for the Buick 231 V6 and the 225 flywheel bolted...
My 71 has 10" brakes front and back. The front are self adjusting and the rear have no self adjusting hardware. I hope to switch to 11" self...
Yea, I made the mistake of trying to go cheaper and listening to the people at one paticular machine shop that told me all I had to do was have...
I'm looking for a flywheel for a 82 Buick 231 even fire V6. I need one that a 225 Pressure plate and clutch will bolt to but I'm not sure what...
After I swaped my 225 for a 231 I installed an Edlebrock four barrel intake with 500 cfm Edlebrock carb. I went with an HEI distributer, outside...
I'm interested the brake parts you have. It is hard to find brake parts for 10" brakes. What do you want for them? 8)
I swaped my 225 out for a 1982, 231 none turbo, even fire in my 71 CJ. All I had to do was get the 75 lb fly wheel from my 225 rebalanced do to...
I used my air inpact hammer with a cutting tool to remove the center bushing and rubber. I purchased a truck 3 in 1 ball joint tool which is...
I used the stock seat mounts on my 71 to install a couple of high back Toyota pickup seats. I cut the brakets off the front rails, shortend the...
I just finished rebuilding the front 10" brakes on my 71 and I started on the rear. My rear brakes do not have any of the self adjusting parts...
I have high back seats on modified original brackets in my 71 CJ.The seats are Toyota highback truck seats. The passenger side doesn't tip up for...
I installed an HEI with my 1982 231EF in my 71 CJ5. I had to use a allen head intake manifold bolt under the HEI to get it to fit. The salesman at...
Separate names with a comma.
