1. Registration trouble? Please use the "Contact Us" link at the bottom right corner of the page and your issue will be resolved.
    Dismiss Notice

Recent Content by mcne2026

  1. mcne2026
    Post

    Need to Re-upholster original low-backs

    Mine cost $700 to do in So Cal. Just for the fronts.
    Post by: mcne2026, Dec 20, 2006 in forum: Intermediate CJ-5/6/7/8
  2. mcne2026
    Post

    HELP! Having trouble with parts

    I just got a complete parking brake assembly, from the handle all the way to the brackets on the brakes. Cost $150 but well worth it since mine...
    Post by: mcne2026, Nov 21, 2006 in forum: Intermediate CJ-5/6/7/8
  3. mcne2026
    Thread

    Urgent Advice Needed - Flat Tow

    I am picking up a 78 CJ7 in the morning and need to flat tow it about 300 miles home. Rolling hills and some steep grades. My tow vehicle is an...
    Thread by: mcne2026, Nov 11, 2006, 3 replies, in forum: Intermediate CJ-5/6/7/8
  4. mcne2026
    Thread

    350 Tranny in a CJ5

    I have seen a couple adds on Craigslist and EBay of CJ5's with V8's and 350 Automatic Tanny's. Is it easy to fit a 350 in a Early CJ? I thought it...
    Thread by: mcne2026, Nov 3, 2006, 1 replies, in forum: Intermediate CJ-5/6/7/8
  5. mcne2026
    Post

    Good lift for highway driving

    Here is my front end. [IMG] [IMG] [IMG] [IMG]
    Post by: mcne2026, Oct 24, 2006 in forum: Intermediate CJ-5/6/7/8
  6. mcne2026
    Post

    Good lift for highway driving

    Rubicon says '76 and up only. My PO did a shackle reversal and body lift. Also possibly extended front springs, but I don't know for sure. Then he...
    Post by: mcne2026, Oct 24, 2006 in forum: Intermediate CJ-5/6/7/8
  7. mcne2026
    Thread

    Transfer Case Parking Brake

    My '73 CJ5 does not have a parking brake and ALL of the parking brake components have been removed by the PO. Putting it all together looks to be...
    Thread by: mcne2026, Oct 20, 2006, 2 replies, in forum: Intermediate CJ-5/6/7/8
  8. mcne2026
    Post

    Another seat question. The last one, I promise.

    I found the factory nuts for the passenger seat. They were still intact inside the storage bin. Does anyone know what size and thread they are? It...
    Post by: mcne2026, Oct 19, 2006 in forum: Intermediate CJ-5/6/7/8
  9. mcne2026
    Post

    Another seat question. The last one, I promise.

    A large washer it is then. Thanks for the response.
    Post by: mcne2026, Oct 19, 2006 in forum: Intermediate CJ-5/6/7/8
  10. mcne2026
    Post

    Another seat question. The last one, I promise.

    Do you think using just washers between the tub and the nut is good enough for seats and seatbelts. I was thinking some 4" x 4" steel with a whole...
    Post by: mcne2026, Oct 19, 2006 in forum: Intermediate CJ-5/6/7/8
  11. mcne2026
    Post

    '73 CJ5 Seatbelts

    Sorry, I don't have OEM belts. Just whatever the PO had in it. I just want to put them in the correct place for the seat location. Trying to be as...
    Post by: mcne2026, Oct 19, 2006 in forum: Intermediate CJ-5/6/7/8
  12. mcne2026
    Post

    Another seat question. The last one, I promise.

    I thought those belts looked just like some 70's Chevy belts.
    Post by: mcne2026, Oct 19, 2006 in forum: Intermediate CJ-5/6/7/8
New Posts